What Kinds Of Limestone Crusher Are There?

Limestone is a commonly used raw material for building materials. Its main component is calcium carbonate. It is widely used in road construction, bridge, building and other industry fields. It is a medium hardness ore and rock. With the increasing demand for construction projects. The demand for limestone stone is also increasing. After crushing, limestone has a variety of particle size specifications, which can meet a variety of industrial construction. Limestone can be crushed and processed directly into stone or calcined to quicklime. Lime can become slaked lime by adding water or absorbing moisture. Its main component is calcium hydroxide. It can be used as mixing lime slurry, lime paste and so on. It is often used as a painting material and masonry adhesive in building decoration.

Limestone stone processing equipment are: jaw crusher, impact crusher, cone crusher, hammer crusher and other supporting equipment. It plays different roles in the processing. It can meet the demand of various materials: output, particle size, process and so on.

Jaw crusher: often used as the first rough crushing equipment. It achieves material crushing through the squeezing force between the movable jaw plate and the fixed jaw plate. It adopts deep V-shaped crushing cavity. There is no dead zone. The use of oversized bearings and forged spindle can carry more crushing capacity. Through the hydraulic design, the size of the discharged material can be adjusted. It has the features of large crushing ratio, high crushing efficiency, stable operation, environmental protection and energy saving.

Impact crusher: It is often used in limestone crushing production line as the second medium crushing or fine crushing process. It can meet the crushing requirements of different particle levels. Impact crusher has the features of simple structure, stable operation, strong adaptability and convenient operation.

Cone crusher: it is often used as medium or fine crushing. It can crush large blocks or large particles into small particles. The principle is: through the gap between the fixed hammer head and the movable hammer head extrusion and impact. So as to achieve the crushing of fine limestone.

Hammer crusher: It is often used as the first and second medium crushing process in the crushing production line. It can also replace the jaw crusher for coarse crushing. It can be crushed into the specification of 25mm, which has the advantages of low investment cost, simple structure, low production cost and other characteristics.