Shredder Machine Wear Parts

Shredder Machine in the process of use. Through a certain torque . Impact is unavoidable. In the use of shredded materials at the same time, impact and shear and some other parts deformation or wear.

Wear parts of the shredder Machine service life extension methods

Usually. The contact stiffness of the shredder machine parts is much lower than the contact stiffness of the parts themselves. Therefore, improving the contact stiffness of the shredder machine blade is the key to improving the stiffness of the whole shredding system. Knives are often made of wear-resistant alloy steel and special alloy steel. It can reduce the roughness of the crushing chamber. The matching quality of the mutual contact surface between the bottom of the screen and the sawdust machine part. Thus, the degree of wear and energy consumption of the sawdust machine is reduced. The deformation and damage details of the blades are reduced.

The temperature of the rolling bearing of the mill spindle should be less than 65℃. If the rolling bearing of the mill spindle is higher than this temperature, the oil needs to be replaced. If the temperature is still high, the bearings need to be cleaned. If the shredder machine blades are dull, they need to be replaced or ground to ensure that they are level. Replacement of blades should be carried out in time. Thus, the damage to the wear parts can be greatly reduced. Extend the service life cycle.