Metal Shredder Machine Operation Guide

Nowadays, with the rapid development of the metal processing industry. A large amount of metal waste is casually discarded. For the metal shredder recycling problem is crucial. Therefore. Metal shredder machine can meet this demand. Used for efficient processing, energy saving and environmental protection and other advantageous features. Can promote the rapid development of the metal processing industry. Metal shredder machine is a professional processing metal and design and development of efficient processing equipment. Metal waste can be effectively and quickly shredded. Can be shredded into small pieces. Shredder dmachine metal materials for subsequent transport, recycling and reuse. Materials can be processed: metal chips, aluminium chips, alloy steel and other materials.

Metal shredder machine application industry wide, can be used for: metal processing, scrap metal recycling, machinery manufacturing and other industry sectors. In the field of metal recycling industry.

Metal shredder machine operation precautions:

1. The shredder machine needs to be reinforced first. It needs to be fixed on the cement foundation. The ground should be kept flat. There is a certain bearing capacity. The metal shredder machine and the motor should be installed on the machine base made of angle iron. The groove of the pulley wheel should be kept consistent and the outer end of the pulley wheel should be kept in the same plane.

2. Check whether there is any foreign matter in the cutter and cutter box. Check whether there is any damage to the cutter. Whether the transmission belt is stuck, touch phenomenon.

3. Before starting the metal shredder machine machine , make sure the bolts in each position are confined. Whether the drive belt is loose or not. Whether the power supply is correctly connected.

4. After the machine is switched on. Firstly, make the equipment idle. Whether the sound is abnormal. Only in the rated power of the smooth rotation before normal work.

5. Metal shredder machine in the process of work need to check the operation of the blade, feeding should be uniform, to prevent the feeding port blocked. Can not work under high load.

6. Shredder in the process of operation, the operator should always pay attention to the operation. Maintenance tools should not be placed on the equipment.

7. If too much material is thrown into the blockage, it is strictly prohibited to place the hand in the filler, and the operator needs to stand on the side of the equipment when throwing the material. Prevent the material bouncing debris from hitting the body.

8. At the end of the work, do not stop the machine immediately. Should be idle for 1-2 minutes. So that all the materials inside the metal shredder machine are excluded. After stopping the machine needs to be cleaned and maintenance work.