Jaw Crusher Dust Removal In The Process Of Use

Jaw crusher is a commonly used crushing equipment in the field of mining, building materials, metallurgy and other industries. It is used to crush various ores and rocks. In the middle of production, the jaw crusher generates dust. It will affect its environment. It is harmful to the operators. Therefore, it is also crucial to take effective dust prevention measures. Jaw crusher is crushed through the fixed jaw plate and movable jaw plate to squeeze each other. The movable jaw plate can be connected with the drive device through the eccentric shaft. Then it acts up and down through the jaw plate. When the movable jaw plate moves downward. The material is in the crushing chamber. And by the fixed jaw plate and moving jaw plate direct interaction force. Thus, the material is crushed into small particles. In the process of mutual friction and extrusion between materials. Will produce a certain amount of dust.

Jaw crusher dust removal commonly used methods:

1. Sealing setup: Use sealing cover to seal the place where dust is generated. Prevent the spread of dust.

2. Increase the dust extraction device: dust extraction fan and dust through the extraction duct. The dust will be extracted. Jaw crusher reciprocates with each other during the movement. Equipped with dust removal system.

3. Add spraying system: water spraying system is set in the feeding port part of the jaw crusher. The ore will be wet during the crushing process. But make sure that the water consumption is not too large. After wetting, the ore is easy to mud bonding. It may cause clogging. Make sure to use a small amount of water.

4. BSD Foam Dedusting: This system is a new type of dedusting device. It is through the combination of foam dust removal and dry mist dust removal. It adopts modular design. It can effectively control the source of dust pollution. This dust removal system has low water consumption and high dust removal efficiency. The dust control effect inhibition rate is up to 885% or more.