Stone Crusher Plant

Crushers used for crushing stones. Commonly used are: jaw crusher, impact crusher, cone crusher, fine crusher, hammer crusher, impact crusher, roller crusher and so on. There are many kinds and models. It needs to be decided according to the actual production demand of the crushing and sand making plant. Usually a crushed stone plant needs a few pieces of equipment: coarse crusher, medium crusher, fine crusher and so on. According to its processing effect is different. Crushing ores and rocks into the required strength.

Working principle of stone crusher plant

Each type of stone rock its crusher working principle is different. The traditional jaw crusher is driven by a motor to drive the belt and pulley, which makes the moving jaw move up and down through the eccentric shaft. When the moving jaw rises the angle of the static jaw plate becomes larger. Thus, the jaw is pushed to approach the fixed jaw plate. The material is sheared, crushed and crushed in the middle. Thus achieve the purpose of crushing. When the movable jaw goes down, the angle between the elbow plate and the movable jaw plate becomes smaller. The movable jaw plate will leave the fixed jaw plate under the action of pull rod and spring. It leaves the fixed jaw plate. The crushed material is discharged at the bottom of the crushing chamber. With the continuous rotation of the motor cycle movement crushing and discharging materials. Thus realising the demand of large-scale production.

Stone Crusher Plant

Advantages of stone crusher plant

1. Good granularity: the discharged product is in cubic shape with good granularity. The granularity of the discharged material is adjustable. Especially suitable for stone shaping and artificial sand making.
2. Wide range of applicable materials: it can be used for a variety of materials: quartzite, basalt, lapis lazuli, quartzite, limestone, sand and gravel aggregate, ceramics, chemical industry, metallurgy and other industries. Stone crusher can crush many kinds of common ores. It is little affected by the moisture content of materials. The moisture content can be up to about 8%.
3. Low operating cost: reasonable design of crushing chamber and material impact angle design. Less friction with wearing parts.
4. Convenient maintenance: stone crusher has simple structure. The structure of stone crusher is simple, and there are few parts. Installation, maintenance and repair are simple. Operation is more convenient.