Can Removing Paint Pyrolysis Furnace Technology Process

Cans, beer bottles, plastic bottles, etc. are resources that can be re-cycled and reused. Can as an indispensable packaging material in modern life. It is widely used in: beverage, food and many other industry sectors. The cans are turned into treasures after being pyrolysed in the Can Removing Paint Pyrolysis Furnace. It can be reused. Aluminium can be obtained, which can be used for industrial aluminium production and processing. It can be made into: aluminium plates, aluminium discs, battery casings, etc.. Very good returns can be obtained.

Cans are usually made of aluminium. Its surface is covered with a layer of paint. It can serve to beautify the appearance and prevent corrosion and other characteristics. If the cans are directly melted. Then it will reduce the quality of the finished rate. Therefore, it is necessary to remove the paint layer on the surface first. Through the Can Removing Paint Pyrolysis Furnace pyrolysis after aluminium. It can improve the purity of aluminium. It can also improve the economic value.

Automatic Can Removing Paint Pyrolysis Furnace process introduction:

Easy can paint stripping pyrolysis furnace is a kind of efficient and environmental protection paint removal equipment. The pyrolysis principle is carried out through high temperature. The paint layer on the surface of cans can be rapidly pyrolysed. So as to achieve the purpose of paint removal. The whole equipment has the following advantages: high degree of automation, high production efficiency, environmental protection and energy saving, low energy consumption and so on.

Firstly, the cans are shredded into 2-3cm pieces, and then through the feeding system, the Can Removing Paint Pyrolysis Furnace. The furnace must be heated up first. Carbonisation furnace body needs to reach: 350℃~500℃. After the cans are decomposed by pyrolysis. Its surface paint layer will be decomposed and removed. The gas and dust generated by the pyrolysis process of the cans paint removal pyrolysis furnace will be removed by dust removal equipment and environmental protection equipment. After completing the pyrolysis of cans fragments through the cooling discharge device. The material will be cooled. Finally get cans of aluminium.

The Can Removing Paint Pyrolysis Furnace carries out pyrolysis under oxygen-poor conditions. It ensures that the aluminium will not be oxidised after can spitting. The Can Removing Paint Pyrolysis Furnace consists of very good thermal conductivity and sealing effect. It will not cause secondary pollution to the environment. Easy Can Removing Paint Pyrolysis Furnace can achieve continuous production. Thus greatly improving the production efficiency.