Can Stripping Pyrolysis Furnace

At present, the price of aluminium has been rising. Scrap aluminium profiles are also increasing. For example: waste cans, broken bridge aluminium, honeycomb aluminium and other aluminium processing products waste. So how to convert waste cans into recycled aluminium profiles? What equipment is used?

New can recycling solution: can paint stripping furnace. The paint on the surface of cans can be easily removed by high temperature pyrolysis. The aluminium is then recycled. Increase the economic value of the waste material. The cans paint stripping furnace adopts continuous working mode. The equipment has a high capacity and the recovered aluminium is of high purity.

Usually cans are first compressed into blocks. After crushing, they are broken into pieces. After crushing, the material can be carbonised. The furnace body is heated first. The carbonisation temperature should be controlled at about 500℃. After reaching the temperature. Then feed. The charring time of the waste cans from feeding into the charring furnace is 30~40 minutes. The cans paint stripping furnace through the continuous spiral drag in the way to push the material. Waste cans in the process of continuous high temperature pyrolysis to achieve the effect of paint removal. Increase the cooling device, the material after pyrolysis higher temperature. Then enter the cooling device to cool the material. Cool down the finished aluminium at the discharge port. So as to get the aluminium product from the carbonization furnace.