Continuous Carbonisation Furnace Process

Continuous carbonisation furnace is a device for charring in a separate kiln. It adopts dry charring technology. It can make wood materials such as wood chips, rice husk, straw, waste wood, coconut shell, tree branches, fruit wood and so on. Under the condition of high temperature and poor oxygen. Make the material fully send pyrolysis reaction. Cellulose, hemicellulose, lignin and so on gradually decompose. Thus produce carbon monoxide, methane, hydrogen and other combustible gases. At the same time the solid state finished product is: biomass charcoal. In recent years, with the biomass carbonisation field has achieved remarkable success. Continuous carbonisation furnace its high efficiency, environmental protection, low energy consumption more advantageous features. Become an important promoter of the green ground economy.

Continuous Carbonisation Furnace Process

Adopt automatic feeding and automatic discharging. According to the charring demand of different customers. Technical parameters such as furnace temperature and charring duration can be set. Ensure the quality of finished charcoal and charring efficiency. Adopting closed combustion system, burning fuel completely and thoroughly. Adopt PLC intelligent control system, precise electric control system and temperature, oxygen and pressure detecting device. Ensure the stability and safety of combustion. The raw material is crushed to the required particle size. According to a certain feeding speed. Slowly rise. When the temperature in the furnace reaches 600℃-800℃. Carbonisation can be completed. A large amount of combustible gas will be produced during the whole carbonisation process. The tail gas is sent to the bottom of the furnace through the gas circulation system. It is used again for cyclic combustion. The output of carbonised products can be customised according to customer requirements. The specific model and specification should be decided according to the quality of raw materials.

Continuous Carbonisation Furnace Process

Continuous carbonisation furnace adopts high-tech purification technology and is made of special high temperature resistant material. It has the advantages and features of durable, no deformation, no oxidation, good heat preservation, full automatic temperature control, convenient operation, and high rate of finished products. The whole production line is equipped with smoke purification device and smoke recovery system. Smoke and dust will not be produced in the production process. The flue gas is collected by the recovery equipment. The recovered flue gas can be ignited like liquefied gas, and it can also be used for cooking, heating, drying and so on. If you want to know more detailed information about continuous carbonisation furnace. You are welcome to contact!