Horizontal Carbonisation Furnace System

In charcoal carbonisation, a horizontal carbonisation furnace is used. It is similar to the traditional earth kiln. However, it has a high charcoal production rate and is less affected by the level of manual charcoal production. The carbonisation furnace has high production efficiency and can produce one furnace of charcoal a day on average. In the process of mechanism charcoal production. Combustible gases are produced which can be collected and utilised. The flammable gas can then be fully burned through the burner. It can provide the required heat for high temperature carbonisation. Thus the purpose of carbonisation is achieved.

Horizontal Carbonisation Furnace System

Horizontal carbonisation furnace system: all of them adopt dry carbonisation process. Carbonised logs and open fire will not be in direct contact. Biomass raw materials are made into biomass carbon through high temperature carbonisation pyrolysis. The combustible gas produced can be recycled and burned, turning the excess gas into open fire. Biomass raw materials: wood, husk, straw, carbon rods, branches and other bulky raw materials. But not carbonised shredded material. If it is carbonised crushed material: sawdust, coconut shell, etc.. It needs to be shaped by the rod making machine first. Then put into the horizontal carbonisation furnace for carbonisation. The time needed for carbonising one furnace is 8-10 hours. Cooling time is 12-14 hours. Therefore, one furnace carbonisation takes about 24 hours.

Horizontal carboniser is unique in that it has high carbonisation capacity and a wide range of finished products. Its design is compact and practical, easy to operate. If you want to buy horizontal charring furnace, please contact us.