Impact Crusher

Products Detail

Impact crusher is referred to as impact crusher, comprehensive conditions within the sand and gravel industry research and development into a new type of impact crusher. Adopting advanced production technology. Unique structure design. It can crush all kinds of ores (quartzite, granite, basalt, shale, dolomite, etc.) with a feed size of not more than 500mm and a compressive strength of not more than 350MPa. The plate hammer adopts high chromium alloy plate, so it has certain impact resistance, strong anti-wear ability and small wear parts. Impact crusher has the following features: large crushing ratio, selective crushing, convenient operation, easy maintenance, low energy consumption, energy saving and environmental protection.   Working principle: Impact crusher is mainly composed of: plate hammer, liner plate, pulley, rotor, collective, counterweight wheel and other combinations.

The motor drives the pulley through the transmission belt. The material passes through the crushing chamber at the same time. Rotor in the rotating hammer head and boring between each other's impact and thus crushing. When the material enters the rotating area of the plate hammer. The high-speed impact of the plate hammer can make the crushed material continuously slope to the counterattack device installed in the upper part of the rotor. After bouncing back from the impact liner to the rotating area of the plate hammer to be impacted again. The material has large pieces to small pieces. Repeated crushing takes place inside the crushing chamber until the material is crushed to the specified size. Until the material is crushed to the specified size. The material is discharged from the impact crusher outlet.

Raw Materials

Limestone, feldspar, talc, limestone, granite, basalt, dolomite and so on. It is mainly used in: mining, metallurgy, chemical industry, refractory, ceramics, lime cement, etc. It can also be used in: ore crushing, mechanism sand processing, building stone crushing, highway, water conservancy and other industry fields.  

Advantageous

1. Adopting advanced manufacturing process and unique design of plate hammer, which makes the reliability of plate hammer higher.

2. The bearing seat adopts the whole cast steel structure, which ensures the stability of the equipment and higher loading capacity.

3. Semi-automatic operation, through the hydraulic device to quickly adjust the size of the discharge port and the size of the discharged material.

4. crushed material into one, two, three chambers in turn, constantly repeated crushing, good shape of the discharged material.

5. The plate hammer is made of high chromium alloy material, which has strong anti-impact and anti-wear ability.

6. PLC automatic control system can be used  

Technological Process

*Note: The output will be different according to different materials, feed size and other factors, technical parameters are subject to change without notice, the weight and external dimensions of the equipment shall prevail in kind.