Industrial Dryer Furnace

Products Detail

Industrial dryer adopts rotary drum rotary structure, which can be used for rotary dryer drying metal powder, slag, quartz sand, brown carbon, clay, fly ash and so on. The industrial dryer has a wide range of applications. Adopting unique and elaborate design. Adopting special dispersing device. The bonded materials will be dispersed before drying. Thus it can achieve more drying effect. The dryer adopts indirect heat transfer drying method. Drying a certain humidity and particle size of the material.   Industrial dryer is composed of feeding device, dryer body, discharge device, cylinder screw device, induced draft device, transmission device, cleaning device, dust removal equipment, electrical and electronic control system and so on. The material is fed into the main body of the dryer through the feeding device.

Through the spiral propulsion type drying. The metal powder in the inner layer is constantly copied and scattered around by the coping board. The spiral propulsion carries out heat exchange. The metal powder is dried counter-currently from the other end. The material thus achieves the drying effect. The middle layer of the material and the other end and fall into the outer layer. Multi-circuit way is recommended. The material which reaches the drying effect is quickly discharged out of the cylinder under the action of hot air. The material that does not reach the drying effect is dried again by the platen. Until the drying effect is achieved.

Raw Materials

Metal powder, quartz sand, fly ash, quartz sand, brown carbon, iron ore concentrate, slag, etc.  

Advantageous

1. High productivity and energy saving, good drying effect, large processing capacity

2. high intensity of heat transfer process of drying, high drying efficiency

3. Adopting fully sealed design, equipped with dust removal equipment, environmental protection and energy saving.

4. reasonable design of the drag wheel, lubrication methods, improve the service life of the wheel

5. The drum is made of heat-resistant stainless steel bright plate with smooth inner wall.

6. High degree of automation, intelligent PLC control system can be used.  

Technological Process

Capacitors can be treated using the continuous carbonisation oven method. Firstly, the capacitors are put into the carbonisation furnace. And the carbonisation process is carried out. In this process, high temperature is generated in the furnace. So that the plastic, rubber and oil paper undergo carbonisation reaction. It is eventually removed completely. Only pure aluminium residue is left.