Products Detail
Pre-treatment for large aluminium shell batteries. The pretreatment is mainly carried out by load discharge and shell cutting treatment. Among them, there are two considerations for shell cutting treatment. First, because the shell of the large aluminum shell battery is finished aluminium. The value is large, and the shell if it is crushed and sorted. Other substances of the battery will affect the purity of the shell aluminium. Resulting in a reduction in its value. Secondly, large aluminum shell batteries usually have relatively large poles. In crushing and sorting, it will increase the difficulty of the process. Therefore, the pre-treatment method of cutting the shell after discharge is adopted. Placement: The batteries to be treated are placed on the doubling chain by manual or mechanical devices. Through the first pass robot. The single cells placed in disorder can be placed uniformly in the shelves. Perform arranging.
Regularisation: after arranging the batteries. Through the second pass robot. Re-arrange the battery in the specified orientation (adjustment of electrode orientation). This facilitates the subsequent discharge process. Discharge: The regulated batteries are uniformly placed in the core tray. The cores are fed into the discharger via a conveyor belt for processing. The principle of discharge is load discharge. The discharge time is 1-2h. After discharging the single battery. The battery end caps are separated by a cap cutter. The end caps are collected directly by a material trolley. The rest is sent to the next process via conveyor belt for further disposal. Separation of the battery movement and shell by means of a movement separator. The shell can be collected directly. The movement is collected and disposed of in a uniform manner.
发表回复